Pre-beta version of Bookmap for MacOS

Market data, Trading, Technical support, Features requests, etc
Zack
Posts: 61
Joined: Mon Jun 11, 2018 12:41 pm
Been thanked: 8 times

Pre-beta version of Bookmap for MacOS

Post by Zack » Thu Jan 10, 2019 2:24 pm

Pre-beta version of Bookmap for MacOS is now officially launched

Most of the bugs found were fixed, however, note that current build is still in pre-beta state. Also, please make sure you read the below notes:
 
  • Not all adapters are supported. You can run Bookmap MAC version with: Rithmic, dxFeed, CQG, IB, IqFeed, Cedro, GDAX, OkCoin (also Bitmex and Bitfinex, see below). however, you can't run Bookmap with Stage5, Gain, Ninja, XTrader, Transact
  • Important note for Rithmic users: if you are connected to rithmic provider and open more than 3 or 4 symbols at a time, you may reach MAC open file limit. Other providers are not affected. It will take some time to resolve this issue, we will notify you in this thread when it is done.
  • External providers installation: guide. Currently there are Bitmex and Bitfinex providers.
  • Guide to find Bookmap Logs (may be useful when contacting support).


To download the latest version click here (upd September 10 2019)

Macos 10.11+ supported. If you have macos 10.10 or lower please update your macos to newer version.

After download, follow a regular DMG installation process:
  • double click the .dmg to make its content available (name will show up in the Finder sidebar), usually a window opens showing the content as well.
  • drag the application from the .dmg window into /Applications to install (may need an administrator password)

vogel24
Posts: 1
Joined: Sun Jan 13, 2019 9:31 pm

Re: Pre-beta version of Bookmap for MacOS

Post by vogel24 » Tue Jan 15, 2019 12:08 am

unfortunately i'm receiving the following error when connecting to the pre-beta version using CQG. i verified that my account was enable 2x today with my FCM. anyone else have this issue with CQG?
Attachments
bookmaperror.png
bookmaperror.png (331.09 KiB) Viewed 7927 times

Serg
Posts: 106
Joined: Mon Jun 11, 2018 12:40 pm
Has thanked: 17 times
Been thanked: 28 times

Re: Pre-beta version of Bookmap for MacOS

Post by Serg » Wed Jan 16, 2019 1:31 pm

vogel24 wrote:
Tue Jan 15, 2019 12:08 am
unfortunately i'm receiving the following error when connecting to the pre-beta version using CQG. i verified that my account was enable 2x today with my FCM. anyone else have this issue with CQG?
Hi,
The fact that you received this message means that connection to CQG was established, but refused to be accepted. Can you please send me an info that would allow CQG to identify you (for, instance, email), and we will contact CQG. No need to send private info on public forum. You can send it via a private message or email support with reference to this post.
S

kite11m
Posts: 13
Joined: Wed Nov 28, 2018 3:44 pm
Has thanked: 5 times
Been thanked: 9 times

Re: Pre-beta version of Bookmap for MacOS

Post by kite11m » Mon Jan 21, 2019 6:09 pm

Hello

It seems that I have not been able to see Iceberg Orders for a while now for DXfeed Equities. For CME DXfeed I am able to see iceberg orders just fine. When will that bug be fixed?

Also is this pre-beta version compatible with Mojave?

serhii
Posts: 17
Joined: Fri Jul 13, 2018 1:07 pm

Re: Pre-beta version of Bookmap for MacOS

Post by serhii » Fri Jan 25, 2019 2:55 pm

kite11m wrote:
Mon Jan 21, 2019 6:09 pm
Hello

It seems that I have not been able to see Iceberg Orders for a while now for DXfeed Equities. For CME DXfeed I am able to see iceberg orders just fine. When will that bug be fixed?

Also is this pre-beta version compatible with Mojave?
Iceberg detection algorithm is not compatible with DX US Equities data, so this is not a bug and not mac-related.

Regarding Mojave, I'm not sure, but theoretically it should work, you need to try it to realize. I tested the app on macOS High Sierra.

Ates
Posts: 2
Joined: Sat Dec 29, 2018 7:30 pm

Re: Pre-beta version of Bookmap for MacOS

Post by Ates » Fri Jan 25, 2019 10:09 pm

Hi

I can not connect either Rithmic nor CQG. Please check the attached images

CQG Error:
Login failed. Trader is not enabled to use BookMap. Contact your FCM.

Rithmic error:
Invalid credentials. Please edit credentials and try again.

serhii
Posts: 17
Joined: Fri Jul 13, 2018 1:07 pm

Re: Pre-beta version of Bookmap for MacOS

Post by serhii » Mon Feb 25, 2019 4:57 pm

Ates wrote:
Fri Jan 25, 2019 10:09 pm
Hi

I can not connect either Rithmic nor CQG. Please check the attached images

CQG Error:
Login failed. Trader is not enabled to use BookMap. Contact your FCM.

Rithmic error:
Invalid credentials. Please edit credentials and try again.
Most probably the issue is not on Bookmap side.
You can send rithmic log to us so we can contact them directly to figure it out. Rithmic log is located here ~/Library/Application Support/Bookmap/Logs/rithmic-engine-log.000
Open Finder, press Shift+Command+G and paste ~/Library/Application Support/Bookmap/Logs/rithmic-engine-log.000

Contact me in private messages if you need more help.

greendaygoddess
Posts: 1
Joined: Sun Mar 10, 2019 3:45 am

Re: Pre-beta version of Bookmap for MacOS

Post by greendaygoddess » Sun Mar 10, 2019 3:48 am

Hello it appears many of the features are not available such as updated CVD and Liquidity Tracker. When do you expect to add all the features available to Window users?

serhii
Posts: 17
Joined: Fri Jul 13, 2018 1:07 pm

Re: Pre-beta version of Bookmap for MacOS

Post by serhii » Mon Mar 11, 2019 10:27 am

greendaygoddess wrote:
Sun Mar 10, 2019 3:48 am
Hello it appears many of the features are not available such as updated CVD and Liquidity Tracker. When do you expect to add all the features available to Window users?
Features should be also available for mac.
I tested both advanced CVD and LT and it works fine on my machine. I loaded them as specified here and here

If it doesn't work for you, please explain the problem a bit more, maybe attach some screenshots. Also you can send me your contacts in private messages and share the screen.
Attachments
Screen Shot 2019-03-11 at 12.19.12.png
Screen Shot 2019-03-11 at 12.19.12.png (134.21 KiB) Viewed 7197 times

kite11m
Posts: 13
Joined: Wed Nov 28, 2018 3:44 pm
Has thanked: 5 times
Been thanked: 9 times

Re: Pre-beta version of Bookmap for MacOS

Post by kite11m » Thu Mar 21, 2019 12:55 pm

I don't see the liquidity tracker in the api plugin section either. My only options are Chase, Escape and Execute. The "Add" box is grayed out.

Also, every time I open bookmap and I open the previous workspace (I have different instruments in different screens) Bookmap crashes. Then when I reopen and remove connections all the instruments are in one window represented as tabs. Then I must Left Click each tab and move it to the multiple screens. If from one screen I move the tab/instrument into another screen, Bookmap crashes and I have to start all over. This is very time consuming.

On the previous version, when I saved the workspace and the different instruments are in the different screens, then when reopening the previous workspace, everything opened in the correct screens and not in one screen with 15+ different tabs.

Please help. Thanks.

Post Reply